Midmark Ritter M7 Speedclave® - Autoclave

Safety Door 
The safety door on this autoclave automatically seals when pressurized and will not allow the operator to open the door until the chamber is safely depressurized.

Temperature Regulator 
The temperature regulator allows the operator to preset the temperature at a desired setting between 250° F (121° C) and 270° F (132° C). This control, acting as a thermostat, cycles the heating element on and off.

Temperature Gauge 
The temperature gauge indicates the temperature inside the chamber. The gauge is graduated in two-degree increments from 80° F (26.7° C) to 270° F (132° C).

Low Water Cut-out Switch 
The low water cut-out switch prevents "dry burning". The M7 autoclave will operate only when there is enough water present, which prolongs the life of the heating element. A pilot light is on when the heater is on and cycles on and off during normal operation.

Cycle Timer 
The cycle timer regulates sterilization time from 0 to 30 minutes and automatically turns the M7 off when the sterilization cycle is complete. This prevents over-sterilization thus extending the service life of your instruments.

Front Draining Feature 
With our front draining feature, it's easy to clean and maintain. All controls and information are on the front and easily accessible to the operator.